JT37F RELAY

Remark:

1) In case of no tolerance shown in outline dimension:outline dimension ≤1mm,tolerance should be ±0.2mm;outline dimension ＞1mm and≤5mm,tolerance should be±0.3mm;outline dimension＞5mm,tolerance should be±0.4mm.

2) The tolerance without indicating for PCB layout is always±0.1mm.

Notes:

1 ) AgSnO₂ contact can be represented as “(T)” after periodic code.

2) IF the terminal for JT37F is QC type, please don’t weid firectly on terminal.

3) The customer special requirement express as special code after evaluating by JINTIAN.