JT33F RELAY

Remark:

1) The additional tin top is max.1mm.

2) In case of no tolerance shown in outline dimension:outline dimension ≤1mm,tolerance should be ±0.2mm;outline dimension＞1mm and≤5mm,tolerance should be±0.3mm;outline dimension＞5mm,tolerance should be±0.4mm.

3) The tolerance without indicating for PCB layout is always±0.1mm.

4) The width of the gridding is 2.54mm.

Notes:

1) Under the ambience with dangerous gas like H₂S,SO₂ or NO₂ ,plastic sealed type is recommended;Please test the relay in real applications.If the ambience allows,flux proofed type is preferentially recommended.

2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.

3 ) The customer special requirement express as special code after evaluating by JINTIAN. e.g.(335) stands for product in accordance to IEC 60335-1(GWT).