Remark:
1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual producet.
2) In case of no tolerance shown in outline dimension:outline dimension ≤1mm,tolerance should be ±0.2mm;outline dimension＞1mm and≤5mm,tolerance should be±0.3mm;outline dimension＞5mm,tolerance should be±0.4mm.
3) The tolerance without indicating for PCB layout is always±0.1mm.
4) The width of the gridding is 2.54mm.
Notes:
1) Under the ambience with dangerous gas like H2S,SO2 or NO2,plastic sealed type is recommended;Please test the relay in real applications.If the ambience allows,flux proofed type is preferentially recommended.
2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
3) Sensitive loading:3A.
4) The customer special requirement express as special code after evaluating by JINTIAN.
ENG
contact number:0574-62502189
Download
position:
