Remark:
1) The additional tin top is max. 1mm..
2) In case of no tolerance shown in outline dimension:outline dimension ≤1mm,tolerance should be ±0.2mm;outline dimension＞1mm and≤5mm,tolerance should be±0.3mm;outline dimension＞5mm,tolerance should be±0.4mm.
3) The tolerance without indicating for PCB layout is always±0.1mm.
Notes:
1) Under the ambience with dangerous gas like H2S, SO2 or NO2 , plastic type is recommended; Plastic test the relay in real applications. If the ambience allowsm, dust protected type is preferentially recommended.
2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
3) The customer special requirement express as special code after evaluating by JINTIAN.
ENG
position:
contact number:0574-62502189
Download
