JT102FW RELAY

Remark:

1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual producet.

2) In case of no tolerance shown in outline dimension:outline dimension ≤1mm,tolerance should be ±0.2mm;outline dimension＞ 1mm and≤5mm,tolerance should be±0.3mm;outline dimension＞5mm,tolerance should be±0.4mm.

3) The tolerance without indicating for PCB layout is always±0.1mm.

Notes:

1) JT102FW is dust protected products, water cleaning is not allowed.

2) The customer special requirement express as special code after evaluating by JINTIAN.